Cleaning and Storage
Display Cabinets
Caution
Do not wet the surface of the Display Cabinets.
Daily cleaning
• Use a soft anti-static cloth that does not
produce lint when cleaning the surface of the
Display Cabinets. (Recommended cloth: savina
MX wiping cloth made by KB SEIREN, LTD.)
• Use ethyl alcohol (near 100%) to clean stubborn
stains on the surface. Do not use any other
solvents.
• Use commercially available anti-static dust
blowers to clean joints.
Storage (for transportation)
• Make sure the Display Cabinets are completely
dry before packing them.
• Store the Display Cabinets in dry, well-
ventilated environments.
Display Controllers
Daily cleaning
• Use a cloth that has been dampened with a
neutral detergent and thoroughly wrung out to
wipe the device clean. Never use solvents, such
as benzene and thinners.
Storage
• Do not store in environments where
condensation may occur inside the device.
Signal Formats
The system supports the following video signals.
2D Inputs
DisplayPort (Single Input)
Resolution
Input
frame
1)
rate
3840 ×
60p/50p/
30p/25p/
2)
2160
24p
2560 × 1440 60p
1920 × 2160
2)
120p
2)
100p
60p/30p/
2)
25p
/
2)
24p
1920 × 1080
120p/100p/
60p/50p
DisplayPort (Dual Input)
Resolution
Input
frame
1)
rate
3840 ×
120p/100p
2)
2160
26
Input bit
Input color
length
sampling
8-/10-bit
RGB 4:4:4
8-/10-bit
RGB 4:4:4
8-/10-bit
RGB 4:4:4
/
/
8-/10-bit
RGB 4:4:4
Input bit
Input color
length
sampling
8-/10-bit
RGB 4:4:4