Table of Contents
Advertisement
Adjusting the light-up delay time for
Display Cabinets
Use the slider and
buttons for [Cabinet Light
Delay] under [Sync] to specify the light-up delay
time (0 to 4000).
Using Network Features
Connection to the network allows you to operate
the following features:
• Changing the password.
• Setting the ADCP protocol.
• Setting the support network monitoring
protocol (SNMP).
Notes
• When connecting the Display Controller with
the network, consult with the network
administrator. The network must be secured.
• When connecting the Display Controller to a
network, use a network that is built to control
and regulate access from the Internet, such as
a LAN. Direct connection from the Internet
increases security risk.
• SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
• Depending on the operating environment,
unauthorized third parties on the network may
be able to access the unit. When connecting
the unit to the network, be sure to confirm that
the network is protected securely.
• When using the Display Controller connected
with the network, access the control window
via a Web browser. It is recommended to
change the password regularly.
• When the setting on the Web browser is
completed, close the Web browser to log out.
• The menu displays used for the explanation
below may be different depending on the
model you are using.
• Supported Web browsers are Internet Explorer
11, Microsoft Edge (Chromium), Google
Chrome, Safari.
• The menu displays only English.
• If the browser of your computer is set to [Use a
proxy server] when you have access to the
Display Controller from your computer, click the
check mark to set accessing without using a
proxy server.
• IPv6 is not supported.
19
Advertisement
Table of Contents
