Locations And Functions Of Parts And Controls - Sony JunboTron JME-SA200 Operating Instructions Manual

Locations and Functions of Parts and Controls

Front panel
1
2
3
4
5
6
7
1 EJECT (card eject) button (inside)
To eject the digital data card, press the EJECT button
inside the unit using the supplied eject tool.
2 PC CARD (digital data card) slot
Insert the digital data card.
3 LCD display window
4 Function buttons (F1 – F5)
The functions of the buttons change with the stage of
the operation. The current functions are indicated at
the bottom of the display window.
For details, see each section.
5 MENU button
Returns to the upper directory of the menu.
6 CURSOR v/V/B/b buttons
Select the menu items in the display window or change
the set values.
7 ENTER button
Confirms the selected item and stores the set value.
6 CONTROL connector (D-sub 15-pin)
Connect to the CONTROL 2 connector of the JTC-
C200 ICU controller for wired control.
10
Locations and Functions of Parts and Controls Overview
8
9
Rear panel
!º
9 LCD DISPLAY switch
Turns on/off the backlight of the LCD display window.
The battery life will be longer if the backlight is turned
off.
0 Connector guard
Note
Use a connector whose size is smaller than the
connector guard.
!¡ Shoulder strap attachments
Attach the supplied shoulder strap here. Two sets of
the attachments are provided at the top and bottom of
the unit.
!™ POWER switch
Turns the unit on/off.
!£ Battery pack compartment
Attach the NP-F750 rechargeable battery pack (not
supplied) here.
!¢ BATT EJECT (battery eject) lever
Press this lever downward to unlock the battery pack
and remove it.
!¡
!™
!£
!¢
!¡