Removing The Oven Door Gasket (For The Upper & Lower Door Gaskets) - LG LUTE4619SN Service Manual

Slide-in electric range
Hide thumbs Also See for LUTE4619SN:
Table of Contents

Advertisement

REmOvING ThE OvEN dOOR GASkET (For the upper & Lower door gaskets)
WARNING
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electric shock.
• Use caution when handling sheet metal parts
while servicing the range.
- Some parts may have sharp edges, which could result in injury.
1. Open the oven door to its fully down position.
2. Pull the oven door gasket clips out of the liner holes until all of the clips
are removed.
Upper door gasket
Lower door gasket
COmpONENT ACCESS
CAUTION
3. Pull the ends of the gasket out of the liner holes.
Liner Hole
REASSEMBLY NOTE: When you install the new gasket, make sure that
all of the clips are seated in their liner holes, and that the ends of the
gasket are pushed fully into their holes. Use the pointed end of a pencil to
push the gasket ends into the holes.
3-27
Gasket clip

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents