Removing The Convection Element, Fan Blade And Fan Motor (For The Lower Oven Only) - LG LUTE4619SN Service Manual

REmOvING ThE CONvECTION ELEmENT, FAN BLAdE ANd FAN mOTOR (For the Lower oven only)

1. Disconnect power and remove oven racks.
2. Pull the range out of its mounting location so that you can access the
rear of the unit.
3. Remove the back cover. (see page 3-2 for the procedure)
4. Disconnect the wire connection.
5. Remove the four Fan cover screws and set the fan cover aside.
6. Remove the two convection element screws and
pull the element forward.
7. To remove Fan blade, remove nut by screwing clockwise. fan blade
can be replaced from inside oven.
COmpONENT ACCESS
• Be careful not to bend the fan blade
- Doing so can result in vibration, noise, and poor performance
of convection when operating.
8. To remove fan motor assembly, disconnect wire connection and
remove the three bracket screws
9. Pull the fan motor assembly forward.
3-15
CAUTION
Screws
Fan
Convection
blade
heater
Fan cover
Washer
Washer
Nut
Fan cover screws (4ea)
Rear-fan
Fan motor
blade
Mounting
screws (3ea)
Bushing