LG LUTE4619SN Service Manual page 16

Turning on the Bridge Element
There is one dual element located in the left front position. Use the dual
element as a single or bridge element. The bridge element heats the front
single element and the area between the 2 left single elements.
1. Push in the appropriate knob.
2-A. Turn the knob counterclockwise to use it as a Single element.
2-B. Turn the knob clockwise to use it as a Bridge unit.
Single
A
Turning on a Triple Element
There is one triple element that can be used as a single, dual or triple
element.
1. Push in the appropriate knob.
2-A. Turn the knob counterclockwise to use the Single element.
2-B. Turn the knob clockwise to the Dual position to use as a Dual element.
2-C. Turn the knob clockwise to the Triple position to use as a Triple element.
Single
uSING yOuR RANGE
Bridge
B
Dual Triple
The Warming Zone
The Warming Zone, located in the back center of the glass surface, will
keep hot, cooked food at serving temperature. Use the Warming Zone
to keep food warm after it has already been cooked. Attempting to cook
uncooked or cold food on the Warming Zone could result in a food-borne
illness.
FOOD POISON HAZARD: Bacteria may grow in food
at temperatures below 140 °F.
• Always start with hot food. Do not use the warm
setting to heat cold food.
• Do not use the warm setting for more than 2 hours.
Turning on a Warming Zone Element
1. Push the Warming Zone element knob in.
2. Turn the knob in either direction to the desired setting.
The control knob clicks when it is positioned at both Off and Hi.
NOTE:
• For best results, food on the warmer should be kept in its container or
covered with a lid or aluminum foil to maintain food quality.
• The warmer will not glow red like the other cooking elements.
2-4
CAUTION