LG LUTE4619SN Service Manual page 30

WARNING
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
1. Turn off the electrical supply going to the range.
2. Pull the range away from the wall so that you can access the rear panel.
3. Open the oven door.
4. Pull the controller from the range. (See page 3-4)
5. Remove the cooktop (See 3-8)
6. To remove the door latch:
a) Remove the two screws from the door latch
b) Remove the 3 screws on the back panel for remove cooling motor
c) Remove the wires from the cooling motor
COmpONENT ACCESS
CAUTION
d) Remove the 3 screws on the main duct from the cooling motor
Side Brackets
e) To remove the main duct, remove the 7 screws on the main duct
f) To remove the main duct, remove the 2 screws on the back panel
3-9