Konica Minolta IQ-501 Quick Manual page 26

2/27/2020 5:45 PM／D11
< PF-707m(normal size)
a: Paper size indicator
b: Lock release lever
>
26
Withdraw the tray to load paper in.
NOTICE
■ Trays cannot be withdrawn when the machine
is not powered. Be sure to turn the sub power
switch ON.
■ Only one tray can be withdrawn at a time.
27
Fully widen the side guide plates and rear
guide plate.
Turn the side guide fixing knobs (2 pieces) of the
side guide plate counterclockwise to loosen them.
Fully widen the side guide plates and rear guide
plate while pressing the lock release lever of each
guide plate.
NOTICE
■When moving the side guide plates, be sure to
hold the lock release lever of the front one and
the handle of the rear one. If moved only with
the front side guide plate, the side guide plates
may not be fixed in position.
28
Place around 100 sheets of paper into the
tray with the print side up.
Pushing the lock release lever of the side
guide plate, align the side guide plate to
the paper.
29
Turn the bottom plate fixing knob
counterclockwise to loosen it, slide it to
the front, and turn it clockwise to fix the
plate.
25