Konica Minolta IQ-501 Quick Manual page 30

2/27/2020 5:45 PM／D11
38
Move the side guide plates to align the
small size guides to the paper.
Turn the side guide fixing knobs of the side guide
plates counterclockwise to loosen them.
Pushing the lock release lever of the front side
guide plate, move the small size guides to align
them to the paper.
Turn the side guide fixing knobs of the side guide
plates clockwise to fix the small size guides.
39
Align the rear guide plate to the paper.
Pushing the lock release lever, align the rear guide
plate to the paper.
NOTICE
■ Do not load above the limit level indicated on
the small size guides.
■ Be sure that the rear guide plate is securely
aligned to the paper. If any gap is left between
the rear guide plate and paper, the machine
cannot detect the correct paper size, and paper
jams or machine trouble may be caused.
40
Push in the tray until it locks into place.
The paper level indicator of the tray changes from
" " to " " on the [MACHINE] screen and [COPY]
screen.
29