Konica Minolta IQ-501 Quick Manual page 22

2/27/2020 5:45 PM／D11
14
Turn the bottom plate fixing knob
counterclockwise to loosen it, then slide it
to the rear side.
Turn it clockwise to fix it in that position.
15
Return the tray to its original position,
then withdraw it again after the bottom
plate of the tray goes up completely.
When the elevation of tray bottom plate is
completed, the Amount indicator of the tray changes
to " " on the [MACHINE] screen and [COPY] screen.
Withdrawing the tray at this point, you will find that
the tray bottom plate has been elevated to the top
position.
16
Adjust the position of the top edges of the
side guide plates.
Move top edges of the side guide plates to align
them to the paper, then turn the four side guide
fixing knobs clockwise to fix the guides.
NOTICE
Avoid making the gap between the side guide
plates too wide or too narrow for the paper to
be seated straight.
21