Table of Contents
Advertisement
2/27/2020 5:45 PM／D11
Setting Summary of 1a. Daily Care
[Loading paper]
- Max density adjustment Paper Tray:
- The paper actually used for the job Tray:
[Custom Screen]
- Screen1 : [Dot190]
[Color Density Control]
- Use Color Density Control]: [ON]
- Periodical Adj. Execution: [ON]
- Adjustment Execution timing:
- Chart Tray Setting: [OFF]
- Adjustment Interval:
- Concurrent Execution of BothSidesAdj. : [ON]
[Image Diagnosis]
- DetailedDiagnosis/Sync.SimpleDiagnosis : [ON]
- Detailed Diagnosis Result Auto Reset: [ON]
- Output Stored Job after Diagnosis: [OFF]
[Package Color Auto Adj.]
- Screen of Adjustment Target : [Screen1]
- Auto Selection : [ON]
- Gamma Auto. Adj. : [ON]
- Dens. BalanceAdj. : [ON](initial only)/[OFF](daily use)
- Max Density Adj. : [ON]
- Exact color, G7 Calibration or ControllerCalib. : [ON](initial only)/[OFF](daily use)
- Number of Output Job(if Exact Color or G7 is selected) : [1]
- Maximum Density Adjustment Tray: [Tray1]
- Adjustment Tray: [Tray2]
- Auto Run:
[ON] (if the print engine is turned ON and OFF every day)
[OFF](if the print engine is running through the days and not turned OFF daily use)
- Overwrite Tray Set. of Max.DensityAdj. : [ON](initial only)/[OFF](daily use)
[Tray
[During Job
[ON](1000
pages)
1]
[Tray
2]
Runs]
12
Hide quick links:
Advertisement
Table of Contents
