Konica Minolta IQ-501 Quick Manual page 25

2/27/2020 5:45 PM／D11
24
Load paper with the print side up.
Align the stack of paper to the left side of the tray.
Pushing the lock release lever of the rear guide
plate, align it to the edge of the paper.
NOTICE
■ Do not load above the limit level indicated on
the small size guides.
■ Be sure that the rear guide plate is securely
aligned to the paper. If any gap is left between
the rear guide plate and paper, the machine
cannot detect the correct paper size, and paper
jams or machine trouble may be caused.
25
Push in the tray until it locks into place.
The paper level indicator of the tray changes from
" " to " " on the [MACHINE] screen and [COPY]
screen.
24