Rear Panel - ZyXEL Communications LTE3301-M209 User Manual

Table 1 Front panel LEDs (continued)
LED
LTE Signal Strength
WLAN/WPS
LAN

1.7.3 Rear Panel

The following graphics displays the rear panels of the Zyxel Device.
Figure 3 LTE3301-M209 Rear Panel
The following table describes the items on the rear panel.
Table 2 Rear Panel Ports
LABEL
Antenna Connector 1&2
LAN Ports 1-4
Chapter 1 Introduction
COLOR STATUS DESCRIPTION
Green On A valid SIM card is inserted and the wireless WAN interface is
enabled.
Signal strength: Excellent
RSRP (Reference Signal Receiving Power) >= -79 dBm
Orange On Signal strength: Fair
-81 dBm >= RSRP >= -95 dBm
Red On Signal strength: Poor
-97 dBm > RSRP
Blinking There is no LTE signal because there is no valid SIM card inserted
and/or the wireless WAN interface is disabled.
Green On The Zyxel Device is ready and the 2.4GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking The Zyxel Device is sending/receiving data through the wireless
(slow) LAN.
Blinking The Zyxel Device is negotiating a WPS connection with a wireless
(fast) client.
Off The wireless LAN is not ready or has failed or WPS is disabled.
Green On The Zyxel Device's LAN connection is ready.
Off The LAN connection is not ready, or has failed.
DESCRIPTION
Install two external antennas to improve your wireless WAN signals.
Connect a device with an Ethernet port that requires high-speed Internet access.
For example, connect a computer, NAS storage device, gaming console and so on.
LTE3301-M209 User's Guide
16