ZyXEL Communications LTE3301-M209 User Manual page 79

Figure 49 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > WDS
LABEL DESCRIPTION
WDS Setup
Basic Setting Select Disable to turn off the WDS function on the Zyxel Device.
Select AP+Bridge to have the Zyxel Device function as a bridge and access point
simultaneously.
Select Bridge Only to have the Zyxel Device act as a wireless bridge only.
These fields only shows when you select AP+Bridge or Bridge Only in Basic Setting.
Local MAC Address This shows the MAC address of the Zyxel Device.
Remote MAC Type the MAC address of the peer device in a valid MAC address format, that is, six
Address hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301-M209 User's Guide
79