Status Screen - ZyXEL Communications LTE3301-M209 User Manual

Table 7 Navigation Panel (continued)
LINK
Interface
Group
Security
Firewall
Content Filter
IPv6 firewall
Application
SMS
Management
Remote
MGMT
Bandwidth
Management
UPnP
TR-069
Maintenance
General
Account
Time
Telnet from
LAN
Firmware
Upgrade
Backup/
Restore
Restart

2.4 Status Screen

Click to open the Status screen.
Chapter 2 Introducing the Web Configurator
TAB FUNCTION
Interface Use this screen to create a new interface group.
Group
General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/add a
firewall rule.
Content Filter Use this screen to restrict web features and designate a trusted computer. You
can also block certain web sites containing certain keywords in the URL.
Services Use this screen to configure IPv6 firewall rules.
SMS Use this screen to send and view the text messages that the Zyxel Device
received from mobile devices or the service provider.
WWW Use this screen to change your Zyxel Device's remote management settings.
Remote Use this screen to configure through which IP address can access the Zyxel
Management Device.
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
UPnP Use this screen to enable UPnP on the Zyxel Device.
TR-069 Use this screen to configure your Zyxel Device to be managed by an ACS.
General Use this screen to view and change administrative settings such as system and
domain names.
User Account Use this screen to change the user name and password of your Zyxel Device.
Time Setting Use this screen to change your Zyxel Device's time and date.
Telnet from This screen is for troubleshooting only.
LAN
Firmware Use this screen to upload firmware to your Zyxel Device.
Upgrade
Backup/ Use this screen to backup and restore the configuration or reset the factory
Restore defaults to your Zyxel Device.
System Restart This screen allows you to reboot the Zyxel Device without turning the power off.
LTE3301-M209 User's Guide
25