Operation Key - Omron H5CR Instructions Manual

H5CR
Nomenclature
Display
1. Power indicator
2. Signal input indicator
3. Reset indicator
4. Gate indicator
(not included in the H5CR-L)
5. Key protection indicator
(not included in the H5CR-L)
6. Control output indicator
7. Present value
(character height: 8 mm)
(Non-significant zeroes suppressed)
8. Set value
(character height: 4 mm)
(Indicates value in set function mode)
9. Mode indicator
10. Timing indicator
Factory Settings
I
The following table shows the timer settings when it is shipped. Please change the settings as necessary to suit the system before opera-
tion. Settings and the display receive power from the internal battery and are therefore unaffected by external power interruptions.
Model
Time range
Present value
Presets
UP/DOWN mode
Output mode
Output time
Input signal time
Key protect level
Note: With the initial settings, there will be no output even if the power supply is connected. External inputs and outputs cannot be used
without a power supply.
4
2
4
3
1
7
9
14
H5CR-B (Standard)/H5CR-S (Short body)
- -. - -s
0.00 s
0.00 s
UP
A: Signal on delay (I)
Sustained
20 ms
KP-1

Operation key

10
11. Increment keys (1 to 4)
5
(Used to change the corresponding
digit of the set value. Used to change
data in the set mode.)
6
12. Display key
(Switches to the present value display.)
8
13. Mode key
(Switches from run mode to set mode.
Changes items in the set mode.
11
14. Reset key
(Resets timing and outputs.)
13 12
H5CR-L (Basic)
---
H5CR