Operation - Omron H3DE-M2 Manual

H3DE

Operation

J BLOCK DIAGRAM
H3DE-M1/-M2
Zero setting
AC (DC) input
detection
circuit
Power supply
circuit
Start input
H3DE-S1/-S2
Zero setting
AC (DC) input
detection
circuit
Power supply
circuit
J I/O FUNCTIONS
Item
Input Start
Output Control output
Note: When the output type selector switch on the bottom of the Timer is set to the instantaneous side, the relay R2 (terminal numbers
21/25, 22/26, and 24/28) becomes an instantaneous contact and turns ON/OFF in synchronization with the changes in the power
supply.
Time range/
unit selectors
Oscillation
Counting
circuit
circuit
Input circuit
Time range/
unit selectors
Oscillation
Counting
circuit
circuit
H3DE-M1/-M2
Starts operation.
Outputs are turned ON according to designated output mode when preset value is reached. (See Note.)
Operating
mode selector
Output circuit
Indicator
circuit
Power-ON Output
indicator indicator
Operating
mode selector
Output circuit
Indicator
circuit
Power-ON Output
indicator indicator
H3DE-S1/-S2
No input is available.
H3DE