Husqvarna Automower 305 Technical Manual page 41

3.13.3 Example 3
The installation in the picture on the left below is not approved due to the position of charging station.
The charging station is positioned too close to the boundary wire on the right side (viewed in the direction
towards the charging station), which can affect the Guide signal. Moreover, the guide wire is not straight for
a sufficiently long distance in front of the charging station, which can lead to the mower finding it difficult to
follow the guide wire.
The installation may be highly satisfactory using the factory settings if the charging station is instead
positioned as shown in the picture on the right.
Settings 305, 308, R70Li
Guide width
Distance
Proportion
Work hours & Work days
Grade
Settings R40Li
Proportion
Work hours & Work days
Grade
3. INSTALLATION
Value
Medium (factory setting)
99 m (factory setting)
Rarely (factory setting)
Operating time 07:00 - 23:00 (factory setting)
6 days a week
Highly satisfactory
Value
Rarely (factory setting)
Operating time 07:00 - 22:00 (factory setting)
7 days a week
Highly satisfactory
3012-1038 3012-1037
English - 39