Power Source - Kenwood DMC-J7R Instruction Manual

POWER SOURCE

This unit can be used with 4 different power sources: a rechargeable battery, an AC
adaptor, a separately available battery case, and a separately available car adaptor
(DC-C70).
1
2
5
OFF
5V
DC IN
To the
Insert
DC IN 5V
securely,
socket
all the
way in.
Notes:
After charging has been completed, the
AC adaptor may be left connected. (For
example, when charging at night)
The battery will not be charged when-
ever the power to the main unit is tur-
ned on.
If the AC adaptor is removed from the
main unit or from the AC socket whilst
charging, "
about 1 minute. This is normal.
Mark
4
AC 230V, 50 Hz
" will not disappear for
Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of disuse, be sure to
charge it fully.
1
Open the rechargeable battery com-
partment cover.
2
Insert the rechargeable battery.
Insert the side with the arrow first.
3
Close the rechargeable battery com-
partment cover.
4
Plug the AC adaptor into the AC
socket, and then insert the plug on the
AC adaptor lead into the DC IN 5V
socket.
5
Press the
charging.
" " will appear, and the battery will
begin charging.
Battery charging will be complete in 3.0
hours. When the charging is comple-
te, " " will go out.
Do not force open the rechargeable
battery cover too wide.
Do not fit the separately available bat-
tery case when charging the internal
battery.
9
/ OFF button twice to begin