Kenwood DMC-J7R Instruction Manual page 19

RECORDING
SYNC/F.PLAY
ENTER
Recording tracks as a
single track
You can record several pieces of music as
a single track, disable the auto marker
function.
1
Press the EDIT/AUTO MARK button
whilst the recording is paused.
(The display will be blanked
out immediately.)
2
Press the 38 button.
Recording will start.
Note:
When making digital recordings using a
CD player or an MD player, track num-
bers will be created automatically re-
gardless of the setting of the auto
marker function.
Making a track number
automatically:
Press the EDIT/AUTO MARK button whilst
the recording is paused.
"AUTO MARK" will be displayed.
DISP
MODE/INSERT OFF
AUTO MARK
EDIT
To start recording from the
middle of an existing track
You can erase a portion of a track that has
been already recorded and make a new
recording.
Warning:
All of the tracks that follow the newly
recorded track will be erased.
1
During playback, press the 38 button
at the point where you want to begin
re-recording.
2
Press the RECORDING button.
To cancel the operation, press the
/ OFF button.
3
Press the ENTER/SYNC/F.PLAY but-
ton.
All of the tracks and track names will be
erased, following the point where the
playback is paused.
2
4
Press the
>
Recording will start.
Note:
When there is a track that you don't
want to erase after the point on the disc
where you want to make a new recor-
ding, use the move function to move
the track and then make your recording
after that point.
19
3
Number of the track
to be recorded next
button.