Kenwood DMC-J7R Instruction Manual page 37

PLAY MODE
To eliminate the confirmation
sound
Every time a button is pressed, a "beep"
will be heard in the headphones.
To silence the "beep" sound, do the fol-
lowing:
1
Whilst in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INSERT button until "SET
UP" appears.
When you release the button, "BEEP
1 (BEEP ON)" will appear.
2
Press the PLAY MODE button or the
MODE/INSERT button.
"BEEP 0 (BEEP OFF)" will appear,
and the confirmation sound will di-
sappear.
To restore the confirmation sound,
select "BEEP 1 (BEEP ON)".
3
Press the / OFF button.
The normal display will reappear.
REC LEVEL
/CURSOR
MODE/INSERT
OFF
To turn off the display
backlight
Whenever you press a button, the display
will light for about 4 seconds, so that you
can read it in the dark. You can turn off the
backlight.
1
Whilst in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INSERT button until "SET
UP" appears.
When you release the button, "BEEP
1 (BEEP ON)" or "BEEP 0 (BEEP
OFF)" will appear.
2
Hold down the 4 or ¢ button until
"EL on (EL ON)" appears.
3
Press the PLAY MODE button or the
MODE/INSERT button.
"EL off (EL OFF)" will appear, and
the backlight will go out.
To turn the backlight back on, select
"EL on (EL ON)".
4
Press the
The normal display will reappear.
37
/ OFF button.