Kenwood DMC-J7R Instruction Manual page 38

PLAY MODE
To cancel the auto-play
function
When a MiniDisc is inserted, the power will
be turned on automatically, and playback
will begin. You can cancel automatic play-
back.
1
Whilst in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INSERT button until "SET
UP" appears.
When you release the button, "BEEP
1 (BEEP ON)" or "BEEP 0 (BEEP
OFF)" will appear.
2
Press the 4 or ¢ button until "auto
PL (A-PLAY ON)" appears.
3
Press the PLAY MODE button or the
MODE/INSERT button.
"PL off (A-PLAY OFF)" will appear,
and the auto-play function will be
cancelled.
To restore the auto-play function, se-
lect "auto PL (A-PLAY ON)".
4
Press the / OFF button.
The normal display will reappear.
REC LEVEL
/CURSOR
MODE/INSERT
OFF
To cancel the auto power
save function
Power consumption can be reduced by
controlling the memory storage time. You
can cancel the auto power save function.
1
Whilst in the stop mode ...
Hold down the PLAY MODE button or
the MODE/INSERT button until "SET
UP" appears.
When you release the button, "BEEP
1 (BEEP ON)" or "BEEP 0 (BEEP
OFF)" will appear.
2
Press the 4 or ¢ button until the
"auto PS (AUTO Psave)" appears.
3
Press the PLAY MODE button or the
MODE/INSERT button.
"PS off (Psave OFF)" will appear,
and the auto power save function will
be cancelled.
To restore the auto power save func-
tion, select "auto PS (AUTO Psave)".
4
Press the
The normal display will reappear.
About the sound skip guard memory:
During playback, approximately 10 seconds
of information is stored in the semiconductor
memory. Therefore, even when the pickup
cannot read information for a second or two
due to an external shock, the sound will con-
tinue without interruption because the infor-
mation stored in memory is used.
About the auto power save function:
This is a function used to save power when
using the unit with the rechargeable battery or
the alkaline batteries. Whilst in the auto power
save mode, 5 - 10 seconds of sound informa-
tion is stored in memory. When the unit is
used in places exposed to excessive vibra-
tion, cancel the auto power save function.
When the auto power save function is disa-
bled, 10 seconds of sound information is al-
ways stored in memory. (When the AC
adaptor or a car adaptor is used, the informa-
tion storage time is always 10 seconds, regar-
dless of the auto power save mode.)
38
/ OFF button.