Kenwood DMC-J7R Instruction Manual page 20

To check the remaining
disc time
Whilst recording, you can check the remai-
ning time available on the disc.
Press the DISP button whilst recording or
whilst in the recording pause mode.
Remaining recordable time
When the DISP button is pressed
again, the unit will return to the initial
display.
Note:
The display of the remaining disc time
may vary slightly from the actual remai-
ning time. (Page 41)
To create your own track
numbers whilst recording
You can create your own track numbers at
special points in a recording, so that these
points can easily be found later.
At any point where you want to create a
track number whilst recording, press the
RECORDING button on the main unit or
the BASS button on the remote control
unit.
The track number will be written on the
disc and the recording will continue
uninterrupted.
Double time recording in
monaural mode
When recording in the monaural long-play
mode, it can be about twice as long as the
recording time available for a stereo recor-
ding. The monaural long-play mode is very
useful for recording conferences or lectu-
res.
Press the MODE/INSERT button whilst the
recording is paused.
Each time this button is pressed, the
display will switch between the stereo
mode and the monaural long-play
mode.
Lights up whilst in the
monaural long-play mode.
Notes:
If input is from a stereo source, the
sounds from the left and right channels
will be combined.
Although the monitor sound you hear in
the headphones whilst recording is in
stereo, recording will be monaural.
MiniDiscs recorded in the monaural
long-play mode may not be playable on
other MD players.
When a recording is made in the mo-
naural long-play mode, you will be able
to play back the MiniDisc twice as fast
as the normal playback speed. (Page
27)
When the unit is stopped after a recor-
ding has been made in the monaural
long-play mode, the recording mode
will return to the stereo mode automat-
ically.
20