Before Applying Power; Safety Precautions - Kenwood DMC-J7R Instruction Manual

INTRODUCTION
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will
not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails
to operate, notify your dealer immediately. If your unit was shipped to you directly, notify
the shipping company without delay. Only the consignee (the person or company recei-
ving the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should
you transport or ship the unit in the future.
Keep this manual handy for future reference.
WARNING NOTICE :
IN MOST CASES IT IS AN INFRINGEMENT OF COPYRIGHT TO MAKE COPIES OF
TAPES OR DISCS WITHOUT THE PERMISSION OF THE COPYRIGHT OWNERS.
ANYONE WISHING TO SHOULD CONTACT THE MECHANICAL COPYRIGHT PRO-
TECTION SOCIETY LIMITED, OR THE PERFORMING RIGHTS SOCIETY LIMITED.

Before applying power

AC adaptors are designed for operation as follows:
Europe and U.K. .......................................................................................... AC 230 V only

Safety precautions

WARNING :
The marking of products using lasers (Except for some areas).
This label is attached to the bottom panel and says that the component uses laser
beams that have been classified as Class 1. It means that the unit is utilizing laser
beams that are of a weaker class. There is no danger of hazardous radiation outside
the unit.
US and foreign patents licensed from Dolby Laboratories Licensing Corporation
Read this page carefully to ensure safe operation
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LASER PRODUCT
CLASS 1
2