Kenwood DMC-J7R Instruction Manual page 33

To change track names or
disc names
Some MiniDiscs created on other equi-
pment may have more than 100 charac-
ters in a track name or disc name. The
characters from the 101st character and
on cannot be corrected or changed.
To change characters:
1
Put the unit in the character input
mode.
To change characters in a disc name,
perform steps 1 - 2 on page 31.
To change characters in a track name,
perform steps 1 - 3 on page 32.
2
Press the 4 or ¢ button to move
the cursor to the character you want to
change.
3
Enter the new character you want, and
press the ENTER/SYNC/F.PLAY but-
ton.
To delete characters:
1
Put the unit in the character input
mode.
To delete characters in a disc name,
perform steps 1 - 2 on page 31.
To delete characters in a track name,
perform steps 1 - 3 on page 32.
2
Press the 4 or ¢ button to move
the cursor to the character you want to
delete.
3
Press the BASS/DELETE button.
The character will be erased.
4
Press the ENTER/SYNC/F.PLAY but-
ton.
To add characters:
1
Put the unit in the character input
mode.
To add characters to a disc name, per-
form steps 1 - 2 on page 31.
To add characters to a track name, per-
form steps 1 - 3 on page 32.
2
Press the 4 or ¢ button to move
the cursor to the right of the character,
where you want to add a new charac-
ter.
3
Press the MODE/INSERT button.
A space will be inserted.
4
Enter the new character you want, and
press the ENTER/SYNC/F.PLAY but-
ton.
Name/stamp
Master MiniDisc
(Prerecorded
MiniDisc)
1. The sound is recorded.
2. The character informa-
tion, such as the disc
name and track
names is transferred.
1
Record the sound from the master Mi-
niDisc onto a recordable MiniDisc.
Playback unit
Master MiniDisc
Refer to
method. (Pages 11 to 15)
At this point, only the sound is recor-
ded. No character information is trans-
ferred.
33
Recordable
MiniDisc
Recording unit
The sound
is recorded.
Recordable MiniDisc
the standard recording