Kenwood DMC-J7R Instruction Manual page 32

5
When the letter you want is displayed,
press the ¢ button.
To enter more letters in the name, repeat
steps 3 - 5.
6
When the disc name has been completely
entered, press
F.PLAY button.
5
Position where the next
letter will be entered
If an incorrect letter is entered:
To erase a character:
Press the 4 or ¢ button to move the
cursor to the character you want to erase,
and then press the BASS/DELETE button.
To correct a character:
Press the 4 or ¢ button to move the
cursor to the character you want to correct,
and then enter the correct character.
Even after all the letters have been en-
tered, you can still go back and correct
any mistakes.
When you want to enter lowercase
letter:
Enter capital letters as described in step 4
and press the DISP button to change them
to the lowercase letters.
If you press this button again, the letters
will be changed back to capital letters.
To enter a space:
Press the + or – button to select "SPACE".
Then, press the ¢ button to enter a
space.
Type of
characters
Capital letters
Symbols
indicates a space.
the ENTER/SYNC/
6
Lights
up
(They are selected using the + or – button.)
A B C D E
0 1 2 3 4 5
/ ' . ,
! ? ; " #
Track name
Up to 100 characters can be entered for
each name.
1
Play the track which you want to name,
and press the 38 button.
The unit will enter the pause mode.
2
Press the EDIT/AUTO MARK button to
select "Tr NAME".
When "Tr NAME" is selected whilst in
the stop mode, track numbers can be
changed using the 4 or ¢ button.
1
Track number that you
want to give a track name
3
Press the ENTER/SYNC/F.PLAY but-
ton.
The unit will enter the character input
mode.
To cancel the operation, press the
/ OFF button.
4
Perform steps 3 - 5 in the "Disc name"
section.
5
When the track name is completely en-
tered, press the ENTER/SYNC/F.PLAY
button.
Characters <symbols>
V W X Y Z
8 9
– + : ( ) & < >
_
$ % = @ `
*
32
2
Returns to
.
Returns to
.