ADTRAN 3000 User Manual page 29

Chapter 2
This chapter tells you how to connect the Express 3000 to a computer,
how to install the Express 3000 into your system, and how to install
the Express Configuration software. For most instances, once you
have completed these three steps, the Express 3000 is ready to use.
(However, if you want to reconfigure your unit, see Chapter 3, Chap-
ter 4, or Appendix A.) This chapter also provides a physical descrip-
tion of the Express 3000 and discusses using and connecting
supplemental analog devices.
For specific operating system installation procedures, see the follow-
ing sections:
Windows
• Connecting the Hardware: Windows on page 2-2
• Installing the Express 3000: Windows 95/98 on page 2-3
• Installing the Express Configuration Software: Windows on page 2-4
• Installing the Express 3000: Windows NT on page 2-4
Macintosh
• Connecting the Hardware: Macintosh on page 2-6
Installing the Express Configuration Software: Macintosh on
•
page 2-7.
61203153L2-20
Setting Up the Express 3000
Express 3000 User Manual 2-1