Upgrading Software Using Hyperterminal - ADTRAN 3000 User Manual

UPGRADING SOFTWARE USING
HYPERTERMINAL
Instructions for Upgrading Software Using HyperTerminal
Step
1 Download the necessary upgrade files from the
ADTRAN web site ( www.adtran.com ).
2 Connect to the Express 3000 via HyperTerminal:
a. Windows 95
b. When the Connection Description window opens,
c. In the Connect To window, go to the Connect using
d. The COM port Properties window opens next.
3 Type AT!FLASHLOAD to initiate the firmware update.
The AT command is not visible since echo is off by de-
fault. (To enable echo, type ATE1 .)
4 Click the Transfer menu; then click Send File....
5 Click Browse to locate the directory and file to download
to the Express 3000.
61203153L2-20
Start > Programs> Accessories > HyperTerminal
Windows 98
Start > Programs> Accessories > Communication
> HyperTerminal
type in a connection name, select an icon, and click
OK.
field and select the COM port to which the
Express 3000 is connected; click OK.
Change the Bits per second field to 57600 and click
OK.
Express 3000 User Manual
Chapter 6. Upgrading Software
Action
6-3