Test Timeout; Auto Answer; Disable Call Waiting On Pots 1 And 2; Flash/Hook Default - ADTRAN 3000 User Manual

Chapter 3. Using the Express Configuration Program

Test Timeout

Defines the amount of time (in minutes) the Express 3000 tests a
remote unit.

Auto Answer

Answers data calls in three different ways:
Enabled
Disabled
Dump all calls

Disable call waiting on POTS 1 and 2

Instructs Express 3000 to disable call waiting and give callers ei-
ther a ringing tone or a busy tone.

Flash/Hook Default

Flash/hook means to press and release the flash button on the
telephone keypad. The options include Call Waiting and Confer-
ence/Transfer.
Call Waiting
Conference/Transfer Flash/hook used to connect conference call-

Preview Tab

The Preview Tab window displays a list of the configuration parame-
ters and their value for the current profile. ATS refers to the AT com-
mands for that configuration parameter, Description refers to the
particular configuration parameter, and Value lists the corresponding
parameter value.
3-18
Automatically answers incoming data calls.
Does not answer data calls. An AT answer command,
, must be issued before a call can be answered.
ATA
Keeps the line free for outgoing calls by not answering
incoming calls.
Flash/hook used only for call waiting.
ing parties; however, if incoming call occurs,
flash/hook acts as call waiting. (See also, Call
Conferencing on page 5-1.)
Express 3000 User Manual 61203153L2-20