Multi-slot access router supporting up to three t1s of bandwidth (2 pages)
Summary of Contents for ADTRAN NETVANTA 3000 SERIES
Page 1
NETVANTA 3000 SERIES ROUTERS Hardware Installation Guide 1202860L1 NetVanta 3200 Unit 1200870L1 NetVanta 3205 Unit (AC Version) 1200980L1 NetVanta 3205 Unit (DC Version) 1200880L1 NetVanta 3305 Unit 1200861L1 NetVanta 56K/64K Network Interface Module 1200862L1 NetVanta T1/FT1 Network Interface Module 1200863L1...
Page 2
To the Holder of this Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.
Page 3
NetVanta 3000 Series Routers Hardware Installation Guide Conventions Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. Safety Instructions When using your communications equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1.
Page 4
Advance notification and the opportunity to maintain uninterrupted service are given. 4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. The telephone company may require this equipment to be disconnected from the network until the problem is corrected or it is certain the equipment is not malfunctioning.
Page 5
NetVanta 3000 Series Routers Hardware Installation Guide FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 6
Hardware Installation Guide NetVanta 3000 Series Routers Industry Canada Compliance Information Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in front of the certification/registration number) signifies that the Industry Canada technical specifications were met.
Page 7
NetVanta 3000 Series Routers Hardware Installation Guide Affidavit for Connection Of Customer Premises Equipment to 1.544 Mbps And/or Subrate Digital Services For the work to be performed in the certified territory of ___________________(telco name) State of ________________ County of ________________...
Page 8
Hardware Installation Guide NetVanta 3000 Series Routers Warranty and Customer Service ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at: http://support.adtran.com (Click on Warranty and Repair Information, under Support.)
Page 9
Your reseller should serve as the first point of contact for support. If additional pre-sales support is needed, the ADTRAN Support web site provides a variety of support services such as a searchable knowledge base, latest product documentation, application briefs, case studies, and a link to submit a question to an Applications Engineer.
Page 10
These courses include overviews on product features and functions while covering applications of ADTRAN's product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at your site. For more information about training, please contact your Territory Manager or the Enterprise Training Coordinator.
Hardware Installation Guide INTRODUCTION TO THE NETVANTA SOLUTION The NetVanta 3000 Series is a line of modular access routers designed for cost-effective branch office connectivity over frame relay or point-to-point (PPP) networks. These modular platforms offer a complete solution for access routing and WAN connectivity in a single, compact package.
Unpack and Inspect the System Each NetVanta 3000 Series Routers unit is shipped in its own cardboard shipping carton. Open each carton carefully and avoid deep penetration into the carton with sharp objects. After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (see Warranty and Customer Service on page 8).
Page 15
Shipments of the 56K/64K NIM include the following items: • 56K/64K Network Interface Module • Quick Start Guide • 6-foot RJ-45 to RJ-45 cable (ADTRAN P/N 3127004) NetVanta T1/FT1 NIM (1200862L1) Shipments of the T1/FT1 NIM include the following items: • T1/FT1 Network Interface Module •...
Page 16
Analog Modem Dial Backup Interface Module • Quick Start Guide • RJ-45 to RJ-11 cable (ADTRAN P/N 3125M007@A) NetVanta ISDN BRI DIM (1200865L1) Shipments of the ISDN BRI DIM include the following items: • ISDN BRI Dial Backup Interface Module •...
NetVanta 3000 Series Routers Hardware Installation Guide PRODUCT OVERVIEW Reviewing the Base Unit Front Panel Designs Figure 1 shows the NetVanta 3200 front panel. Figure 1. NetVanta 3200 Front Panel Layout Figure 2 shows the NetVanta 3205 front panel. Figure 2. NetVanta 3205 Front Panel Layout Figure 3 shows the NetVanta 3305 front panel.
Hardware Installation Guide NetVanta 3000 Series Routers Front Panel LEDs Table 1 describes the front panel LEDs. Table 1. NetVanta 3000 Series Routers LEDs For these This activity… Indicates that… LEDs… STATUS Green (blinking) The unit is powering up. On power-up the STAT LED blinks rapidly for five seconds, during which time the user may escape to boot mode from the console port.
Reviewing the Base Unit Rear Panel Designs Figure 4 through Figure 7 show the rear panels for the NetVanta 3000 Series Routers. Each chassis is shown with the T1/FT1+DSX-1 NIM installed. The Activity and Link LEDs, which are present on all NetVanta Ethernet ports, are pointed out in Figure 4.
Hardware Installation Guide NetVanta 3000 Series Routers Rear Panel Interfaces and LEDs 10/100BaseT Ethernet Interface and Activity LEDs The Ethernet port is an RJ-48C connector with LEDs. The yellow activity LED flashes when data traffic is being sent or received on the Ethernet port. The green link LED is on when the router has a good connection to the LAN.
Hardware Installation Guide OPTION MODULES The NetVanta 3000 Series offers several option modules designed to meet a variety of networking requirements. The option modules are of two types: plug-in Network Interface Modules (NIMs) and plug-on Dial Backup Interface Modules (DIMs).
NetVanta 56K/64K NIM (P/N 1200861L1) The 56K/64K NIM (shown in Figure 8) provides a WAN interface for the NetVanta 3000 Series Routers. This module provides a single 56K or 64K DDS network interface. Refer to Table E on page 49 for the WAN-DDS connector pinout, and Table L on page 51 for the DBU connector pinout.
NetVanta T1/FT1 NIM (P/N 1200862L1) The T1/FT1 NIM (shown in Figure 9) provides a T1 WAN interface for the NetVanta 3000 Series Routers. This provides a full T1 or fractional T1 network interface. Refer to Table F on page 49 for the WAN-T1 connector pinout, and Table L on page 51 for the DBU connector pinout.
NetVanta 3000 Series Routers Hardware Installation Guide NetVanta T1/FT1+DSX-1 NIM (P/N 1200863L1) The T1/FT1 + DSX-1 NIM (shown in Figure 10) provides a T1 WAN interface for the NetVanta 3000 Series Routers. The T1/FT1 + DSX-1 NIM provides a full T1 or fractional T1 network interface and a DSX-1 interface.
Page 26
Hardware Installation Guide NetVanta 3000 Series Routers Diagnostics • Test pattern generation and detection: QRSS and 511 • Network loopbacks (local and remote); responds to both INBAND and FDL loop codes (T1 interface only) • Alarm generation and detection •...
The NetVanta Serial NIM (shown in Figure 11) is user-configurable to be either a V.35 or X.21 (V.11) interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN P/N 1200873L1) or X.21 (ADTRAN P/N 1200874L1) cable is required (see Caution, below). Refer to...
NetVanta 3000 Series Routers Hardware Installation Guide NetVanta SHDSL NIM (P/N 1200867L1) The NetVanta SHDSL NIM (shown in Figure 12) provides a WAN SHDSL interface for the NetVanta. Refer to Table J on page 50 for the SHDSL connector pinout. The DBU connector on this module is reserved for future enhancements.
NetVanta 3000 Series Routers NetVanta E1/FE1 NIM (P/N 1200868L1) The NetVanta E1 module (see Figure 13) provides a WAN/E1 interface for the NetVanta 3000 Series Routers meeting the requirements of ITU-T G.703/G.704. The module provides a single 2.048 Mbps network interface. Refer to Table G on page 49 for the pinouts.
NetVanta 3000 Series Routers Hardware Installation Guide NetVanta E1/FE1 with G.703 Drop NIM (P/N 1200878L1) The NetVanta E1/FE1 with G.703 Drop module (see Figure 14) provides a single WAN/E1 interface (2.043 Mbps) with user-selectable TS0 assignment and a G.703 drop port which may be used to drop and insert traffic to an E1 PBX.
Page 32
Hardware Installation Guide NetVanta 3000 Series Routers Relevant Requirements/Standards • ACIF S016 • ACA TS001 • ETSI TBR 12 / TBR 13 • EMC - see Electromagnetic Compatibility (EMC) Table on page 5. • ITU G.703, ITU-T G.704 (CRC-4), ITU-T G.823, ITU-T G.797 Environmental °...
NetVanta Analog Modem DIM (P/N 1200864L1) The Analog Modem DIM provides a modem with data rates up to 33.6 kbps for the NetVanta 3000 Series Routers. This DIM is a plug-on card that connects to the NIM. For installation instructions, see Installing Dial Backup and Network Interface Modules on page 41.
NetVanta ISDN BRI DIM (P/N 1200865L1) The NetVanta ISDN BRI DIM provides dial backup access to the public switched telephone network (PSTN) via Basic Rate ISDN for the NetVanta 3000 Series Routers. This DIM is a plug-on module that connects to the NIM.
• Phillips-head screwdriver (rackmounting applications only) To access the command line interface (CLI) of the NetVanta 3000 Series Routers, you will also need a VT100 terminal or PC with terminal emulation software and a console port cable. Instructions on how to access the CLI are given in the Command Reference Guide (provided on the ADTRAN OS System Documentation CD).
Rackmounting NetVanta 3000 Series Routers The NetVanta 3205 and NetVanta 3305 are 1U high, rack-mountable units which can be installed into 19-inch equipment racks. Follow these steps to mount the NetVanta 3000 Series Routers into a rack: Instructions for Rackmounting NetVanta...
NetVanta 3000 Series Routers Hardware Installation Guide Wallmounting NetVanta 3000 Series Routers NetVanta 3200 Instructions for Wallmounting NetVanta 3200 Step Action Decide on a location for the NetVanta 3200. Keep in mind that the unit needs to be mounted at or below eye-level so that the LEDs are viewable.
Hardware Installation Guide NetVanta 3000 Series Routers NetVanta 3205 and NetVanta 3305 Instructions for Wallmounting NetVanta 3205/NetVanta 3305 Step Action Remove the mounting ears. Rotate them 90 so that the portion of the bracket with the mounting holes is flush with the bottom of the chassis, and reattach them to the chassis (see Figure 16).
As shipped, each NetVanta 3000 Series Router is set to factory default conditions. After installing the base unit and any option modules, the NetVanta 3000 Series Router is ready for power-up. To power-up the unit, ensure that the unit is properly connected to an appropriate power source (as outlined in the sections which follow).
NetVanta 3000 Series Routers Hardware Installation Guide Installing Dial Backup and Network Interface Modules The DIMs plug on to the NIMs. The NIMs are then installed in the rear panel option module slot. The following tables list the installation steps. Also see Figure 19 on page 42.
Figure 19. NIM and DIM Installation Your NetVanta 3000 Series Router is now ready to be configured and connected to the network. For more information on configuration for a specific application, refer to the quick start documents provided on your ADTRAN OS System Documentation CD.
NetVanta 3000 Series Routers Hardware Installation Guide Installing the NetVanta VPN Accelerator Card (1202368L1) The optional VPN Accelerator Card plugs into a 32-bit PCI slot and is designed to be used in the NetVanta 3305 and following products to provide encryption/decryption and security acceleration services for the host processor.
Hardware Installation Guide NetVanta 3000 Series Routers Table C. Console Port (DCE) Pinout for NetVanta 3200 (p/n 1202860L1) Name Description Data Carrier Detect (output) Receive Data (output) Transmit Data (input) Data Terminal Ready (input) Signal Ground Data Set Ready Tied to pin 1 (output) —...
NetVanta 3000 Series Routers Hardware Installation Guide NIM Pinouts WAN Connectors Table E. WAN-DDS Connector Pinouts Name Description Transmit data to the network–RING 1 Transmit data to the network–TIP 1 — UNUSED Receive data from the network–TIP Receive data from the network–RING Table F.
Hardware Installation Guide NetVanta 3000 Series Routers Table H. DSX-1 Connector Pinouts Name Description Transmit data toward the DTE–RING Transmit data toward the DTE–TIP — UNUSED Receive data from the DTE–RING 1 Receive data from the DTE–TIP 1 — UNUSED Table I.