Specifications - Mira Activate Series Installation And User Manual

Specifications

Standards and Approvals
The Mira Activate complies with all relevant directives for CE marking. The Mira Activate is
a type 1 electronic, independently mounted control for surface mounting. Mira Activate is a
thermostatic water mixing valve.
General
Pollution Degree
Rated Impulse Voltage
Connections
Suitability for Drinking Water Applications
Solenoid Type
Water Connection Type
Mira Digital Mixing Valve High Pressure/Combi (not suitable for pumped gravity systems)
Pressures
Thermostatic Standard
Maximum Static Pressure
Maximum Maintained Pressure
Minimum Maintained Pressure
Supply Pressure Differential
Temperatures
Maximum Temperature (setting range)
Minimum Temperature
Hot Water Range - Supply
Cold Water Range - Supply
Temperature Stability at Valve Outlet
Ambient Temperature
Maximum Relative Humidity
Flow Rates
Nominal Flow Rate
Electrical Rating
Supply Voltage
Maximum Load
Output Supply Voltage to Valve
11
2
2.5 kV
15mm pushfit
Not suitable
Pilot operated
Permanent
TMV 2 - HP (BS EN 1111 Type 2)
1000 kPa (10 bar)
500 kPa (5 bar)
100 kPa (1 bar)
Nominally equal
35°C - 48°C (Factory Preset 45°C)
Thermostatic control down to 30°C
Full Cold also selectable
55°C - 65°C
1°C - 20°C
± 1°C at recommended supply conditions
1°C - 50°C
95% non-condensing at 30°C
Valve capable of up to 16 l/min @ 1 bar
100V - 240V AC 50/60Hz
38W
12V DC