A serial mouse disables the AccuPoint II. With a PS/2 mouse, you
can choose to have the AccuPoint II active at the same time.
Setting up a PS/2 mouse with the AccuPoint II
When you connect a PS/2-compatible mouse to the PS/2 port, you
may use the mouse, the AccuPoint II, or both.
CAUTION: When connecting any PS/2 device, Toshiba
recommends turning off your computer to prevent any
possible hardware damage.
PS/2 mouse with Windows 98 Second Edition
To set the PS/2 mouse to work simultaneously with the
AccuPoint II:
1
Click Start, Settings, then point to Control Panel.
2
Double click the Toshiba Hardware Setup icon.
3
Select the Pointing Devices tab and click Simultaneous.
TECHNICAL NOTE: You can also set this using the "Pointing
Devices" setting in TSETUP.
PS/2 mouse with Windows NT
To set the PS/2 mouse to work simultaneously with the
AccuPoint II:
1
Click Start, select Programs, then select Toshiba Utilities.
2
Click Hardware Setup, click the Hardware Options button,
and then select the Pointing Devices tab.
3
Select the Simultaneous radio button and click OK.
Connecting Other External Devices
Part I: Getting to Know Your Computer
Using a mouse
37