Removing Compact Discs - Toshiba 8100 User Manual

8 Push the tray in by pressing gently on the center of the tray
until it clicks into place.
You are ready to use the disc.
Playing a CD or DVD
For information on playing a disc, see "Using Microsoft CD
Player" on page 121, or "Using the DVDExpress DVD Player" on
page 122.

Removing compact discs

To remove a compact disc with the computer turned on:
1 Press the eject button on the drive.
CAUTION: Do not press the eject button while the computer
is accessing the DVD-ROM drive. Wait for the system
indicator panel' s DVD-ROM drive light to go out before you
open the drawer.
Also, if the disc is still spinning when you open the
DVD-ROM tray, wait for it to stop before you remove it.
2 Pull the tray until it is fully open, remove the disc, and place it
in its protective cover.
3 Push the tray in to close the drive.
To remove a compact disc with the computer turned off:
1 Insert a slender object, such as a straightened paper clip, into
the manual eject hole.
2 Pull the tray until it is fully open, remove the disc and place it
in its protective cover.
3 Push the tray in to close the drive.
Using the optional DVD-ROM drive
Part I: Getting to Know Your Computer
Learning the Basics
79