Toshiba 8100 User Manual page 133

1 Click Start, point to Settings, Control Panel, and click on
the Power Saver icon.
2 Open the Power Save Modes tab and set your options.
3 For more information, see "Power Saver" on page 154.
If you are working in MS-DOS, you may also set the power usage
mode in TSETUP. For more information, see "TSETUP" on
page 151.
Using a hot key to set the power usage mode
You may use a hot key to set the power usage mode.
To set the power usage mode in Windows 98 Second Edition:
1 Press and
Fn
pop-up window.
Power usage mode pop-up window (Windows 98 Second Edition)
2 While continuing to press
desired power usage mode.
The power usage modes under battery power are:
Long Life, Normal, and High Power.
The power usage mode under AC power is Full Power only
3 Release the
Fn
The pop-up window disappears. You're now in the selected
mode.
Power Management
simultaneously to display the power usage
F2
, press
Fn
key.
Part I: Getting to Know Your Computer
Conserving power
until you select the
F2
107