Toshiba 8100 User Manual page 173

Toshiba Hardware Setup has the following tabs:
❖
General — Shows the BIOS version, memory configuration,
and Hard Disk Drive (HDD) mode.
❖
Password — Allows you to set the user password, an
expansion station eject password, and an owner string.
❖
Device Config. — Shows the Device configuration options.
❖
Parallel/Printer — Allows you to configure the parallel port
default settings.
❖
Keyboard — Allows you to configure the
emulation for an external keyboard.
❖
USB — Allows you to enable or disable USB Legacy
Emulation.
❖
PC Card — Allows you to change the controller mode default
settings.
❖
Hardware Alarm — Allows you to set the volume of the Low
Battery alarm, the Panel Close alarm, and the system beep.
❖
LAN — Allows you to enable or disable Wake on Lan
❖
Pointing Device — Allows you to use both the AccuPoint II
and external pointing devices together or have the system
auto-select one.
❖
Display — Allows you to change various default settings for
the built-in LCD display.
❖
CPU — Allows you to enable or disable the processor's serial
number.
❖
Boot Priority — Allows you to change the sequence in which
your computer searches the various drives for the operating
system.
By changing any of the options that appear in the dialog boxes and
clicking Apply, you can reconfigure that function. Any options
Toshiba Utilities
Hardware Setup
function key
Fn
Part II: Technical Reference
147
®
.