Making Your External Keyboard Emulate The Fn Key; Using A Mouse; Setting Up A Ps/2 Mouse With The Accupoint Ii - Toshiba Satellite Pro 6000 Series User Manual

70
Getting Started

Using a mouse

Making your external keyboard emulate the Fn key

An external keyboard does not have the
Satellite Pro
the computer's hot keys or have set up key combinations in
Fn-esse
external keyboard. Don't worry: you can use a key combination on
the external keyboard to emulate the
key combination through the Windows Control Panel Toshiba
HWSetup icon. For more information about Hardware Setup, see
"Toshiba Hardware Settings" on page
Using a mouse
You may want to use a mouse instead of the computer's built-in
pointing device, the AccuPoint II. You can use a serial mouse or a
®
PS/2
To use a PS/2-compatible mouse with the AccuPoint II, you must
follow the configuration steps below; otherwise, the PS/2 mouse
will disable the AccuPoint II.
NOTE: After logging on to your system, the mouse cursor
may move to the upper-right side of the screen. If this
occurs, push the
original position.

Setting up a PS/2 mouse with the AccuPoint II

When you connect a PS/2-compatible mouse to the PS/2 port, you
may use the mouse, the AccuPoint II, or both.
CAUTION: When connecting any PS/2 device, turn off your
computer to prevent any possible hardware damage.
®
6100 Series computer's built-in keyboard. If you use
®
, you'll probably miss these features when using an
-compatible mouse.
ESC
Fn
key. You can set up this
Fn
or Windows key to return it to its
key contained on the
174.