Miscellaneous Programming; Consecutive Receipt Number Programming - Sharp XE-A102 Instruction Manual

Miscellaneous Programming

You can program miscellaneous settings suitable for use.
1 ➜ S
Parameters:
A Date format
B Time format
C Decimal point position for domestic currency
D Resetting receipt no. when issuing Z report No*
Amount tendered compulsory for t
E
and C
F Subtotaling compulsory
Entry digit limit for R , C , V and p
G
H Rounding
• Time format
When 12 hour format is set, the a.m. time will be displayed with
and the p.m. time will be displayed with
• Amount tendered compulsory
When set for compulsory, always enter the amount tendered by the customer before finalizing the
transaction.
• Subtotaling compulsory
When set for compulsory, always press S before finalizing the transaction.

Consecutive Receipt Number Programming

The receipt number is printed on every receipt or journal, and report, together with the date and
time. The number is incremented each time a receipt is issued. To start from a specific
consecutive number, enter a figure one less than that number.
Receipt start number (max. 4 digits) ➜
➜ ABCDEFGH ➜ S
and printed with the mark @.
S
(➜ )
Selection:
MMDDYY
DDMMYY*
YYMMDD
12 hour format
24 hour format*
0 though 3 (Default: 2)
Yes
No*
Yes
No*
Yes
0 though 8 (Default: 8)
Round off*
Round up
Round down
and printed without no mark,
x ➜ S
(➜
Advanced Programming
Entry:
0
1
2
0
1
0
1
0
1
0
1
0
1
2
S
)
(Default: 0001)
21