Utilizing Various Features For Sales Entries; Plu Entries; Convenient Sales Entries - Sharp XE-A102 Instruction Manual

Utilizing Various Features for Sales Entries

Before making sales entries, make sure that a paper roll is installed in case receipt function is on.
Also make sure to turn the mode switch to the REG position.

PLU Entries

Enter the PLU code of a PLU item and press P. The PLU item will be registered.
Example Selling a PLU1 item and a PLU15 item by credit.
1P 15P R
To use PLU item sales entry, you must program PLUs.

Convenient Sales Entries

When selling only item by cash
When a sale is for only one item paid by cash, such as a pack of cigarettes, you can use SICS
function. It is applicable only to department keys programmed for SICS or to PLUs associated with
such departments. The drawer opens after pressing the department or PLU key.
When entering more than one of the same department or PLU items
You can enter two or more of the same department or PLU item by pressing department or PLU
key repeatedly (repetitive entry), or by using the multiplication key (multiplication entry). It will
be convenient to use the multiplication key when selling the same item in bulk. For operation, refer
to the example shown below.
Example Repetitive entry
Selling two 2.00 items (dept. 1) and three PLU5 items for cash
2:!! 5PPP t
Example Multiplication entry
Selling six 1.50 items (dept. 1) and twelve PLU5 items for cheque payment
6x 150! 12x 5P S C
Mixed tender sale
When the amount tendered by cash or cheque is less than the sales amount including tax, the
display shows a deficit and "
tendered entry or make a credit entry.
Example Your customer pays 8.30 in cash and 50.00 by credit for an including-tax subtotal of
58.30.
S 830 t R
12
(Single Item Cash Sale (SICS) entry)
". To compensate for the deficit, make an additional amount-
Amount received Displays a
in cash deficit and " "