Turning The Power On And Off; Restarting The Machine - Sharp MX-M753U Operation Manual

TURNING THE POWER ON AND OFF

The machine has two power switches. The main power switch is at the top right after the front cover is opened. The
other power switch is the [POWER] key (
Main power switch
When the main power switch is switched on, the main
power indicator on the operation panel lights up.
Turning on the power
(1) Switch the main power switch to the "on"
position.
(2) Press the [POWER] key (
power.
• Before switching off the main power switch, make sure that the DATA indicator for printing and the DATA and LINE
indicators for image send are not lit or blinking on the operation panel.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key (
failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power switch in the "on" position.

Restarting the machine

In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (
and then press the key again to turn the power back on.
In some states of the machine, pressing the [POWER] key (
use the main power switch to switch the power off and then on.
) on the operation panel at the top right.
[POWER] key
"On"
position
"Off" position
Turning off the power
(1) Press the [POWER] key (
) to turn on the (2) Switch the main power switch to the "off"
) and the main power switch and unplug the power cord if you suspect a machine
) to restart will not make the settings take effect. In this case,
1-15
BEFORE USING THE MACHINE
Main power indicator
power.
position.
[POWER] key
) to turn off the
) to turn off the power
Contents