Adding A Watermark To Acopy (Watermark) - Sharp MX-M753U Operation Manual

ADDING A WATERMARK TO A COPY (Watermark)
When making a copy, specific text can be added to the copy as a watermark. The density, angle, and pages (first page
only or all pages) can be selected for a watermark. The watermark is printed at the centre of the paper.
Printing "CONFIDENTIAL" on the paper
The following 12 selections are available for the stamp text.
CONFIDENTIAL
FOR YOUR INFO.
URGENT
Three levels can be selected for the density of the watermark.
The angle of a watermark can be selected in the range +90 degrees to -90 degrees in increments of 45 degrees.
Touch the [Watermark] key in the stamp selection screen.
1
See steps 1 to 4 of "GENERAL PROCEDURE FOR USING
Stamp
Watermark
CONFIDENTIAL PRIORITY
FOR YOUR INFO. DO NOT COPY
2
URGENT DRAFT
PRELIMINARY FINAL
IMPORTANT COPY
TOP SECRET PLEASE REPLY
PRIORITY PRELIMINARY
DO NOT COPY IMPORTANT
DRAFT TOP SECRET
Cancel OK
Exposure
First Page
1 2 3
Angle
All Pages
(+90 ~ -90)
45
2-103
FINAL
COPY
PLEASE REPLY
STAMP" (page 2-86).
Touch the key of the watermark that you
wish to use.
COPIER
Contents