Adding Margins (Margin Shift) - Sharp MX-M753U Operation Manual

ADDING MARGINS (Margin Shift)

This function is used to shift the copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a string or in a binder.
Shifting the image to the right so the copies can be bound at the left edge with a string
Margin shift positions
Left
edge
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Margin Shift] key.
☞
Special modes menu (1st screen)
(1)
Special Modes
Margin Shift
3
Right Left Down
(page 2-42)
Set the margin shift.
(2) (3)
(1) Touch the margin shift position.
OK
Cancel OK
(2) Set the amount of the margin shift with
Side 1 Side 2
10 10
(0~20) (0~20)
mm mm
(3) Touch the [OK] key.
2-45
Not using margin shift
1
The punch holes cut off
part of the image
Right
edge
Select one of the three positions.
.
0" to 1" (0 mm to 20 mm) can be entered.
You will return to the base screen of copy mode.
COPIER
Using margin shift
1
The image is moved to
allow space for the string
holes so the image is not
cut off.
Top edge
Contents