Eliminating Blank Pages From Atransmission (Blank - Sharp MX-M753U Operation Manual

ELIMINATING BLANK PAGES FROM A
TRANSMISSION (Blank Page Skip)
When blank pages are included in originals scanned, the blank pages can be detected and automatically eliminated
from transmission.
• This function cannot be used in Internet fax mode.
• Depending on the original, some pages that are not blank may be detected as blank pages and thus not sent, and some
pages that are blank may not be detected as blank and thus sent.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Specify the destination.
☞
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Special Modes] key.
3
(3) Touch the
(4) Touch the [Blank Page Skip] key.
☞
SPECIAL MODES (page 5-71)
Blank pages
Send
Original size
detector
(page 5-18)
keys to switch through the screens.
5-96
SCANNER/INTERNET FAX
Blank pages are not sent
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Contents