Theben Line coupler S KNX Manual page 8

Line coupler S
General
Topology
Up to three repeaters are connected in parallel in a line. Each line segment requires its own power supply.
Main Line = Main line with up to 15 line couplers
Line = Line with up to three repeaters
Line Segment = Line segment, per segment up to 64 devices are possible (in total up to 256 devices are
possible) including the repeater.
Note
The topology is not defined with the repeater. Under the coupler 1.1.0, the addresses 1.1.0 to 1.1.255
can be assigned as required to the segments.
Status: March 16 (Subject to change)
Line coupler S
Line coupler S
Line coupler S Line coupler S
Page of
8 29