Table of Contents
Advertisement
Line coupler S
Device technology
Device type
Line coupler S
* ... = current version number of the application program.
Note
The ETS and the current version of the device application program are required for programming.
The current application program can be found with the respective software information for download on
the Internet at www.theben.de/downloads. After import it is available in the ETS under Theben
AG/System components/...
The device does not support the locking function of a KNX device in the ETS. If you inhibit access to all
devices of the project with a BCU code, it has no effect on this device. Data can still be read and
programmed.
Note
Different application programs are available with the Line coupler S for ETS 3 and ETS 4. Some of the
functions for the ETS 4 are not available in the applications for the ETS 3, see Overview, page 16.
In ETS 3, there is a separate application for coupling and for repeating (Couple/1.x or Repeat/1.x), in
ETS 4, there is a common application (Couple Repeat/2.x).
All applications are upwards compatible, i.e.:
•
•
•
Status: March 16 (Subject to change)
Application program
Maximum number of
communication objects
Couple Repeat/...*
0
Couple/...*
0
Repeat/...*
0
The old applications of Line coupler can be loaded in the Line coupler S (ETS 3). This is particularly
useful if in an existing project an Line coupler has to be replaced by an Line coupler S.
The applications Couple/1.x or Repeat/1.x can be loaded in the Line coupler S via the ETS 3 or the
ETS 4.
The new application Couple Repeat/2.x with extended functional range is only available for the
ETS 4.
Maximum number of
Maximum number of
group addresses
associations
0
0
0
0
0
0
Page
of
11
29
Advertisement
Table of Contents
