Table of Contents
Advertisement
Line coupler S
Commissioning
Broadcast telegrams
Options:
Broadcast telegrams are used, for example, by the ETS to identify KNX devices in programming mode.
•
route: Broadcast telegrams are routed.
•
Block: Broadcast telegrams are blocked.
In case of errors repeat telegrams
Options:
•
yes: If an error is detected when a telegram is transmitted, the telegram is repeated up to three times.
•
no: The telegram is not repeated.
•
user-defined: The response can be set individually for different types of telegram.
Status: March 16 (Subject to change)
route
block
yes
no
user-defined
Repeat group addressed telegrams
Options:
yes
no
•
yes: If an error is detected when a group addressed telegram is transmitted, the telegram is
repeated up to three times.
•
no: The telegram is not repeated.
Repeat physically addressed telegrams
Options:
yes
no
•
yes: If an error is detected when a physically addressed telegram is transmitted, the telegram
is repeated up to three times.
•
no: The telegram is not repeated.
Repeat broadcast telegrams
Options:
yes
no
•
yes: If an error is detected when a broadcast telegram is transmitted, the telegram is repeated
up to three times.
•
no: The telegram is not repeated.
Page
of
20
29
Advertisement
Table of Contents
