Table of Contents
Advertisement
Line coupler S
Commissioning
3.2
Parameters
The parameterization of the Line coupler S is implemented using the Engineering Tool Software ETS.
The application program can be found in the ETS at Theben AG/System components/...
The following chapter describes the parameters of the Line coupler S using the parameter windows. The
parameter windows feature a dynamic structure, so that further parameters may be enabled depending on
the parameterization and the function.
The default values of the parameters are underlined,
e.g.:
Options:
3.2.1
Application for ETS 4
The application Couple Repeat/2.x with extended functional range is only available for the Line coupler S
and ETS 4.1.2 or higher.
Status: March 16 (Subject to change)
yes
no
Page
of
17
29
Advertisement
Table of Contents
