Table of Contents
Advertisement
Line coupler S
General
1
General
The Theben Line Coupler S KNX is a modular installation device with a module width of 2 space units. It is
used as a line or area coupler or as a repeater. As a line coupler, the Line coupler S connects a line with a
main line, as an area coupler it connects a main line with an area line. It provides electrical isolation in this
way.
1.1
Using the product manual
This manual provides you with detailed technical information relating to the function, installation and
programming of the Line Coupler. The application of the device is explained using examples.
The manual is divided into the following sections:
•
Chapter 1
•
Chapter 2
•
Chapter 3
•
Chapter A
1.1.1
Structure of the product manual
Application programs with different ranges of functions can be loaded in the line couple S.
For this reason, all the parameters and functions for ETS 4 and also for ETS 3 are explained in chapter 3.
Note
Different application programs are available with the line coupler S for ETS 3 and ETS 4. Some of the
functions for the ETS 4 are not available in the applications for the ETS 3, see Overview, page 16.
In ETS 3, there is a separate application for coupling and for repeating (Couple/1.x or Repeat/1.x), in
ETS 4, there is a common application (Couple Repeat/2.x).
All applications are upwards compatible, i.e.:
•
•
•
Status: March 16 (Subject to change)
The old applications of line coupler can be loaded in the line coupler S (ETS 3). This is particularly
useful if in an existing project an line coupler has to be replaced by an line coupler S.
The applications Couple/1.x or Repeat/1.x can be loaded in the line coupler S via the ETS 3 or the
ETS 4.
The new application Couple Repeat/2.x with extended functional range is only available for the
ETS 4.
General
Device technology
Commissioning
Appendix
Page
of
3
29
Advertisement
Table of Contents
