Device Function Repeater; Parameter Window Settings - Theben Line coupler S KNX Manual

Table of Contents

Advertisement

Line coupler S
Commissioning
3.2.1.3

Device function Repeater

3.2.1.3.1

Parameter window Settings

This parameter window is visible if in Parameter window General, page 18, the device function Repeater
has been selected.
In case of errors repeat group addressed telegrams on main line
Options:
yes: If an error is detected when a group addressed telegram is transmitted on the main line, the
telegram is repeated up to three times.
no: The telegram is not repeated.
In case of errors repeat group addressed telegrams on line
Options:
yes: If an error is detected when a group addressed telegram is transmitted on a line, the telegram is
repeated up to three times.
no: The telegram is not repeated.
Status: March 16 (Subject to change)
yes
no
yes
no
Page
of
23
29

Advertisement

Table of Contents
loading

Related Products for Theben Line coupler S KNX

This manual is also suitable for:

9070880

Table of Contents