Line coupler S
Device technology
2.4.1
Display elements
Indicator LEDs are located on the front of the Line coupler S.
The response of the display elements is described in the following table:
Status: March 16 (Subject to change)
LED
KNX operation
OFF: The Line coupler S is not operational. No power supply is applied or it has
malfunctioned.
ON: The Line coupler S is operational and is supplied by the main line. The power supply is
applied.
OFF: No main line connected or voltage failure on the main line.
ON: The main line is connected.
Flashes: Telegram traffic on the main line.
OFF: No line connected or voltage failure on the line.
ON: A line is connected.
Flashes: Telegram traffic on the line.
Page
of
15
29