Removing An Ocp Module - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
▶ Push the OCP module into the slot.
Figure 97: Installing the OCP module (B)
▶ Fasten the OCP module with the knurled screw (see circle).
Concluding steps
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Configure the new MAC address in the OS, if you have no VIOM
(ServerView Virtual-IO Manager) installed. If you have VIOM installed, it is
not necessary to configure the MAC address. This is virtualized by VIOM.
▶ Inform the customer about new MAC addresses. For more information, see
"Looking for MAC/WWN/GUID and SAS addresses" on page
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 104.
▶
"Configuring LAN teaming" on page
9.5.3

Removing an OCP module

Upgrade and Repair Unit
(URU)
Tools:
tool-less
190
59.
60.
112.
Upgrade and Maintenance Manual
106.
Hardware: 5 minutes
RX4770 M6